Kenmore Pro 72583 Manuel du propriétaire télécharger pdf (Page 40)

Before You Call

Solutions to Common Problems

Before you call for service, review the following list. It may save you time and expense. Possible solutions are provided with the

problem listed:

Problem Solution

Poor baking results • Many factors effect baking results. Use proper oven rack position. Center food in the

oven and space pans to allow air to circulate. Bakeware may be too lightweight or

warped. Use heavier quality bakeware so foods being prepared may bake more evenly.

Preheat oven to the set temperature before placing food in the oven. Try adjusting the

recipe's recommended temperature or baking time. See “Adjusting the Oven Tempera-

ture” on page 31 if you feel the oven is too hot or cold.

Entire appliance does not operate. • Make sure power cord is plugged properly into outlet.

• Be sure regulator gas valve is turned to ON. See installation instructions.

• The time of day is not set. The oven clock must first be set in order to operate the oven.

• Be sure oven controls are set properly. See “Setting The Clock” on page 18 and review

instructions for the desired cooking function in this manual.

• Service wiring is not complete. For assistance call 1-844-553-6667 in the U.S.A. and 1-

800-469-4663 in Canada (see back cover).

• Power outage. Check house lights to be sure. Call your local electric company.

• Short in cord/plug. Contact your dealer, installing agent, or authorized servicer to

replace cord/plug.

• House fuse has blown or circuit breaker has tripped immediately following installation.

House fuse may not be fully engaged. Check fuse and screw or engage circuit breaker

securely. Call your local electric company for service outage information. For assistance

call 1-844-553-6667 in the U.S.A. and 1-800-469-4663 in Canada (see back cover).

Oven light does not work. • Be sure the oven light is secure in the socket. See “Removing and Replacing the Oven

Door” on page 38.

Flames inside oven or smoking from

oven vent.

• Excessive spills in oven. Grease or food spilled onto oven bottom or oven cavity. Wipe up

excessive spills before starting oven. If flames or excessive smoke are present when using

broil, see “Setting Broil” on page 22.

Self clean does not work. • Oven control not set properly. Make sure the oven door is closed. Make sure you have

removed the oven racks and the oven rack supports from the oven. Review “Clean” on

page 32.

Oven racks do not slide easily. • This appliance comes with lubricated porcelain oven racks, which can remain in the oven

during the self-clean cycle. Do not clean this vegetable oil lubrication off the racks. It is

important that the sides of the oven racks always have a light coating of vegetable oil.

To maintain optimal rack performance, re-apply a thin layer of vegetable oil to the sides

of the rack after every self-clean cycle or when the rack becomes difficult to slide.

Glide Rack does not slide smoothly • Glide Rack needs lubrication. For instructions on how to care for your Glide Rack, see

“Caring for Your Porcelain Enameled Glide Rack”

on page 37.

Surface burner flame is too high. • Surface control knob is set too high. Adjust to lower flame setting. Burner caps are not

seated properly. Check that all surface burner caps are level and seated correctly on

surface burner heads. See “Cleaning Surface Burner Heads” on page 36.

• Incorrect L.P. conversion. Refer to L.P. conversion kit instructions to correct.

1 2 ... 35 36 37 38 39 40 41 42 43 44

Commentaires sur ces manuels

Pas de commentaire

Kenmore Pro 72583 Manuel du propriétaire Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Cuisiniers Kenmore Pro 72583